Cisco路由器口令的恢复(cs500)
This document describes how to recover a password on a Cisco cs500 communication server. The Cisco cs500 does not have a console port so to recover a password you must erase the configuration then configure the server again. Step-by-Step Procedure 1.Unplug the Cisco cs500 server. 2.Press and hold the DEFAULT button on the front of the chassis. 3.Turn on the server. The OK and LAN LEDs blink on and off. 4.When the OK and LAN LEDs blink off (after about 15 seconds), release the DEFAULT button. The 500-CS enters setup mode in about two to ten minutes. 5.Configure the server. |
凌众科技专业提供服务器租用、服务器托管、企业邮局、虚拟主机等服务，公司网站：http://www.lingzhong.cn 为了给广大客户了解更多的技术信息，本技术文章收集来源于网络,凌众科技尊重文章作者的版权，如果有涉及你的版权有必要删除你的文章，请和我们联系。以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢! |
