快速业务通道

Cisco路由器口令的恢复(1020)

作者 佚名技术 来源 网络技术 浏览 发布时间 2012-07-01
 

Description

This document describes how to recover a password on a Cisco 1020 router.

Since the Cisco 1020 router is often not physically secured, to perform a password recovery you must call Cisco Systems or your distribution channel and provide a Cisco 1020 router generated challenge. Using the override program, the support representative can provide a one-time password you can use to enter enable mode.

Notes:

Overrides can be done only from the console.

Press Return at the password prompt if the enable password is not set.

Step-by-Step Procedure

1.From the console, log in to the Cisco 1020 router with username enable and password override.

The 1020 prints a challenge.

2.Provide the support representative with the challenge.

The challenge is used to provide the response.

3.On the 1020 console, log in with username enable and use the response as the password.

You''re now in enable mode.

4.Type wr t to see the existing password or type conf t to change the password.

凌众科技专业提供服务器租用、服务器托管、企业邮局、虚拟主机等服务,公司网站:http://www.lingzhong.cn 为了给广大客户了解更多的技术信息,本技术文章收集来源于网络,凌众科技尊重文章作者的版权,如果有涉及你的版权有必要删除你的文章,请和我们联系。以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息,谢谢!

分享到: 更多

Copyright ©1999-2011 厦门凌众科技有限公司 厦门优通互联科技开发有限公司 All rights reserved

地址(ADD):厦门软件园二期望海路63号701E(东南融通旁) 邮编(ZIP):361008

电话:0592-5908028 传真:0592-5908039 咨询信箱:web@lingzhong.cn 咨询OICQ:173723134

《中华人民共和国增值电信业务经营许可证》闽B2-20100024  ICP备案:闽ICP备05037997号