使用busybox-1.13.3 创建Linux根文件系统(2)
| ronics
DMA channel 0 at c4800000, irq 33 DMA channel 1 at c4800040, irq 34 拥有帝国一切，皆有可能。欢迎访问phome.net DMA channel 2 at c4800080, irq 35 DMA channel 3 at c48000c0, irq 36 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) yaffs Nov 27 2008 09:58:27 Installing. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Console: switching to colour frame buffer device 80x30 fb0: s3c2410fb frame buffer device lp: driver loaded but no devices found ppdev: user-space parallel port driver Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410 s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410 s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded DM9000: dm9k_init_module Board init for dm9000a finished! <DM9KS> I/O: c480e000, VID: 90000a46 eth0: at 0xc480e000 IRQ 18 eth0: Ethernet addr: 08:00:3e:26:0a:5b Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Driver ''sd'' needs updating - please use bus_type methods S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2410-nand s3c2410-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) NAND_ECC_NONE selected by board driver. This is not recommended !! 拥有帝国一切，皆有可能。欢迎访问phome.net Scanning device for bad blocks Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00080000 : "Boot Agent" 0x00080000-0x00280000 : "S3C2410 kernel" 0x00280000-0x00680000 : "S3C2410 rootfs" 0x00680000-0x04000000 : "user" usbmon: debugfs is not available 116x: driver isp116x-hcd, 03 Nov 2005 s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage |
凌众科技专业提供服务器租用、服务器托管、企业邮局、虚拟主机等服务，公司网站：http://www.lingzhong.cn 为了给广大客户了解更多的技术信息，本技术文章收集来源于网络,凌众科技尊重文章作者的版权，如果有涉及你的版权有必要删除你的文章，请和我们联系。以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢! |
