Solaris硬盘分区简介
作者 佚名技术
来源 操作系统
浏览
发布时间 2012-06-29
Solaris下,一个磁盘包含8个分区,标记为0-7。此信息可以通过format命令,然后选择一个硬盘来看到,例如,在我自己的系统中(Solaris 9,Ultra 60),显示出来的信息如下: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 /pci@1f,4000/scsi@3/sd@0,0 Specify disk (enter its number): 0 selecting c0t0d0 [disk formatted] Warning: Current Disk has mounted partitions. FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name ! quit format>; p PARTITION MENU: 0 - change `0'' partition 1 - change `1'' partition 2 - change `2'' partition 3 - change `3'' partition 4 - change `4'' partition 5 - change `5'' partition 6 - change `6'' partition 7 - change `7'' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk ! quit partition>; 不要看到内容这么多,就被吓住了,其实,format命令之后0. c0t0d0 FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name ! quit format>; p 这里所列出来的,是可以使用的命令,比如我在最下面format>;,就是用了p这个命令(慢点,上面没有p这个命令啊?其实,这里p就是partition的简写),然后,列出了以下内容: PARTITION MENU: 0 - change `0'' partition 1 - change `1'' partition 2 - change `2'' partition 3 - change `3'' partition 4 - change `4'' partition 5 - change `5'' partition 6 - change `6'' partition 7 - change `7'' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk ! |
凌众科技专业提供服务器租用、服务器托管、企业邮局、虚拟主机等服务,公司网站:http://www.lingzhong.cn 为了给广大客户了解更多的技术信息,本技术文章收集来源于网络,凌众科技尊重文章作者的版权,如果有涉及你的版权有必要删除你的文章,请和我们联系。以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息,谢谢! |
你可能对下面的文章感兴趣
关于Solaris硬盘分区简介的所有评论