''原创内容转载、引用代码核心部分请注明出处
硬盘读写统计.vbs
If (Lcase(Right(Wscript.FullName,11)) = "wscript.exe") Then
CreateObject("WScript.Shell").Run("%Comspec% /C " &Chr(34)&"mode con cols=52 lines=22" &"&Title 硬盘读写统计.vbs By: FastSLZ PCEVA Or BatHome &&Cscript.exe //NoLogo "&Chr(34)& Wscript.ScriptFullName &Chr(34)&Chr(34)),3:Set WMI = Nothing:Wscript.Quit
End If
Dim WMI,vName,IDE,cPPP,sNow
Input = 1:InputS = Input*980
On Error Resume Next
Set WMI = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
Set IDE = WMI.ExecQuery("Select * from Win32_DiskDrive WHERE InterfaceType=''IDE''")
Set cPPP = WMI.ExecQuery("SELECT * FROM Win32_PerfRawData_PerfDisk_PhysicalDisk WHERE Name <> ''_Total''")
For Each oIDE In IDE
For i = 0 To IDE.Count
Select Case oIDE.Index
Case i
For Each oPPP In cPPP
If InStr(oPPP.Name, i) Then vName = oPPP.Name
Next
Select Case i
Case 0 Disk0=oIDE.Caption&" "&oIDE.FirmwareRevision:Size0=oIDE.Size:DskP0=vName
Case 1 Disk1=oIDE.Caption&" "&oIDE.FirmwareRevision:Size1=oIDE.Size:DskP1=vName
Case 2 Disk2=oIDE.Caption&" "&oIDE.FirmwareRevision:Size2=oIDE.Size:DskP2=vName
Case 3 Disk3=oIDE.Caption&" "&oIDE.FirmwareRevision:Size3=oIDE.Size:DskP3=vName
Case 4 Disk4=oIDE.Caption&" "&oIDE.FirmwareRevision:Size4=oIDE.Size:DskP4=vName
Case 5 Disk5=oIDE.Caption&" "&oIDE.FirmwareRevision:Size5=oIDE.Size:DskP5=vName
End Select
End Select
Next
Next
Set cPPP = Nothing:Set IDE= Nothing
If Disk0 <> "" Then WScript.Echo Left(DskP0,1)&":"&vbTab& Disk0 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size0/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size0/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP0,Len(DskP0)-2)
If Disk1 <> "" Then WScript.Echo Left(DskP1,1)&":"&vbTab& Disk1 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size1/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size1/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP1,Len(DskP1)-2)
If Disk2 <> "" Then WScript.Echo Left(DskP2,1)&":"&vbTab& Disk2 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size2/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size2/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP2,Len(DskP2)-2)
If Disk3 <> "" Then WScript.Echo Left(DskP3,1)&":"&vbTab& Disk3 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size3/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size3/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP3,Len(DskP3)-2)
If Disk4 <> "" Then WScript.Echo Left(DskP4,1)&":"&vbTab& Disk4 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size4/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size4/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP4,Len(DskP4)-2)
If Disk5 <> "" Then WScript.Echo Left(DskP5,1)&":"&vbTab& Disk5 &vbTab _
&vbCrLf&vbTab&"厂商容量："&Round(Size5/1000000000) &"GB" _
&vbCrLf&vbTab&"实际容量："&Round(Size5/1073741824,2) &"GB" _
&vbCrLf&vbTab&"分区状态："&Right(DskP5,Len(DskP5)-2)
WScript.Echo "↑请输入要监控的硬盘编号，并按回车键"
stdInput = WScript.StdIn.Readline
stdInput=Left(UCase(stdInput),1)
If stdInput > "5" Or stdInput < "0" Then MsgBox "输入错误" :WScript.Quit
If InStr(DskP0, stdInput) Then Call Network(Disk0,Size0,DskP0)
If InStr(DskP1, stdInput) Then Call Network(Disk1,Size1,DskP1)
If InStr(DskP2, stdInput) Then Call Network(Disk2,Size2,DskP2)
If InStr(DskP3, stdInput) Then Call Network(Disk3,Size3,DskP3)
If InStr(DskP4, stdInput) Then Call Network(Disk4,Size4,DskP4)
If InStr(DskP5, stdInput) Then Call Network(Disk5,Size5,DskP5)
Sub Network(Disks,Sizes,DskPs)
sNow=Now
Do
Dim A
''WScript.Echo "已运行"&Ts\3600&"小时"&(Ts mod 3600)\60&"分钟"&(Ts mod 3600) mod 60&"秒"
Set A = WMI.ExecQuery("Select * from Win32_PerfRawData_PerfDisk_PhysicalDisk Where Name=''"&DskPs&"''")
For Each B In A
R1 = B.DiskReadBytesPersec
W1 = B.DiskWriteBytesPersec
If RA0 = "" Then RA0 = B.DiskReadBytesPersec Else RA1 = R1 End If
If WA0 = "" Then WA0 = B.DiskWriteBytesPersec Else WA1 = W1 End If
Next
Set A = Nothing
WScript.Sleep(InputS)
Set A = WMI.ExecQuery("Select * from Win32_PerfRawData_PerfDisk_PhysicalDisk Where Name=''"&DskPs&"''")
For Each B In A
R2 = B.DiskReadBytesPersec
W2 = B.DiskWriteBytesPersec
Next
Set A = Nothing
WScript.Echo Disks &" " &Round(Sizes/1073741824) &"GB" &vbCrLf _
&"实时读取：" & CheckSize((R2-R1)/Input) &"/s" &vbCrLf _
&"实时写人：" & CheckSize((W2-W1)/Input) &"/s"&vbCrLf _
&"脚本累计读取：" & CheckSize(RA1-RA0) &vbCrLf _
&"脚本累计写入：" & CheckSize(WA1-WA0) &vbCrLf _
&"开机累计读取：" & CheckSize(R1) &vbCrLf _
&"开机累计写入：" & CheckSize(W1) &vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf&vbCrLf _
&"已运行"&Ts\3600&"小时"&(Ts mod 3600)\60&"分钟"&(Ts mod 3600) mod 60&"秒"
Ts=DateDiff("s", sNow, Now)''Ts=TS+1
Loop
End Sub
Function CheckSize(SZ)
On Error Resume Next
If SZ => 1073741824 Then
SZ = FormatNumber(Round(SZ/1073741824,2))&" GB"
ElseIf SZ => 1048576 Then
SZ = FormatNumber(Round(SZ/1048576,2))&" MB"
ElseIf SZ => 1024 Then
SZ = FormatNumber(Round(SZ/1024,2))&" KB"
Else
SZ = "0"&FormatNumber(Round(SZ/1024,2)) & " KB"
End If
CheckSize=Right(" " & SZ,10)
End Function
